 PrimeRail培训 |
| 培养对象 |
1.理工科背景，有志于数字集成电路设计工作的学生和转行人员；
2.需要充电，提升技术水平和熟悉设计流程的在职人员；
3.集成电路设计企业的员工内训。
|
| 入学要求 |
|
学员学习本课程应具备下列基础知识：
◆电路系统的基本概念。 |
|
班.级.规.模--热线:4008699035 手机:15921673576/13918613812( 微信同号) |
|
坚持小班授课，为保证培训效果，增加互动环节，每期人数限3到5人。 |
|
上.课.时.间.和.地.点 |
上课地点：【上海】：同济大学(沪西)/新城金郡商务楼(11号线白银路站) 【深圳分部】：电影大厦(地铁一号线大剧院站)/深圳大学成教院 【北京分部】：北京中山/福鑫大楼 【南京分部】：金港大厦(和燕路) 【武汉分部】：佳源大厦（高新二路） 【成都分部】：领馆区1号（中和大道） 【沈阳分部】：沈阳理工大学/六宅臻品 【郑州分部】：郑州大学/锦华大厦 【石家庄分部】：河北科技大学/瑞景大厦 【广州分部】：广粮大厦 【西安分部】：协同大厦
近开课时间(周末班/连续班/晚班）： PrimeRail培训开班时间：具体开班时间请咨询客服！ |
|
实验设备 |
☆资深工程师授课
☆注重质量
☆边讲边练
☆推荐工作
专注高端培训17年，曙海提供的课程得到本行业的广泛认可，学员的能力
得到大家的认同，受到用人单位的广泛赞誉。
★实验设备请点击这儿查看★ |
|
新优惠 |
|
◆在读学生凭学生证，可优惠500元。 |
|
质量保障 |
|
1.免费重修；
2、课程完成后,授课老师留给学员手机和Email,保障培训效果,免费提供半年的技术支持。
3、培训合格学员可享受免费推荐就业机会。 |
PrimeRail培训 |
第一阶段 |
ObjectivesAt the end of this workshop the student should be able to:
- Set up and perform Power/Ground (PG) reliability analysis for checking Static and Dynamic Voltage Drop and Electromigration (EM) potential violations
- Explanation of and/or set up the phases of Dynamic analysis of PrimeRail that involve the following:
- Library Characterization
- Data preparation
- Power Analysis
- PG Parasitic (RC) Extraction
- Dynamic (Transient) Rail Analysis
- Violation Viewing, Reporting and Correction
- What-if Analysis ? Package parasitics and Decap insertion
- Voltage Drop Derated Timing Analysis
- Accurate Hard Macro Modeling
- Power Management( power switch) Cell handling
- Set up PG analysis for hierarchical and top-level
- Use the PrimeRail graphical user interface (GUI) for the PG rail analysis, including what-if analysis
Audience Profile
Design, verification or CAD engineers who perform power/ground interconnect reliability analysis at the "Block" or "Full-Chip" levels. This covers a wide spectrum of designs of digital, memory, and analog/mixed signal.Prerequisites
Experience in the following areas is recommended to gain the most value from the workshop content:
- Physical layout
- Physical extraction
- Power simulation
|
Static Analysis
- Introduction to Rail Analysis - requirements, capabilities and database preparation
- Power and Timing Model creation
- Power supply, net switching and Transition Time inputs
- Power and Rail Analysis
- Mapping, reporting, querying and what-if Analysis
- Integrated Flows - Hardmacro modeling, Power gating and Voltage derated timing analysis
|
第二阶段 |
Dynamic ( Transient) Analysis
- Introduction, database requirements and flows
- Library Characterization and LSF
- Cell-Level Dynamic Analysis-PP Run
- Cell-Level Dynamic Analysis-Transient Analysis
- What-if Analysis ? Package Parasitics and Decap Insertion
- Mapping, waveform viewing, reporting and querying
- Tx-Level Dynamic Analysis-Data Preparation
- Tx-Level Dynamic Analysis
- Tx-Level Signal EM Analysis
- Macro Modeling - Memory, Analog, custom or Hardmacro blocks
|
总部李老师